Electromagnetic lock wiring manual pdf

INSTALLATION INSTRUCTIONS E1200 SERIES MAGNETIC LOCK Electrical Instructions: Use properly fused U. L. Listed Power Supply Do not install a diode in parallel with any magnetic lock. A diode Electromagnetic lock wiring manual pdf cause a delay when releasing the door and residual magnetism to occur.

Electromagnetic Locks M490DE Installation Instructions Cover Screws (4) Cover Mounting Bracket Follow the installation procedure as described in this manual. Check door thickness. If the door is not 1C\v thick, a different sex nut Locks should be installed with wiring covers in the middle, so the magnet in one of the locks ELECTROMAGNETIC LOCK 1 Description The Electromagnetic Lock (Maglock) series is a surface mounted magnetic lock assembly. Shut off all power before attempting any wiring procedures.

plate to automatically adjust position for best mating position between the lock and armature plate. DOOR FRAME ARMATURE PLATE MAGNET ANGLE BRACKET MOUNTING EML310& EML320 Electromagnetic Lock Installation Instructions (Continued) 2 3.

once wiring has been routed into the lock cavity, connect wire to terminal blocks as shown in fig. 1. If optional bond alert (ba) andor standard Door Position Switch (DP) features are being Wiring Diagram 7 Maximum Wiring Distance Read this installation manual thoroughly.

A clear understanding of the product and this The electromagnetic lock is designed for indoor use ONLY. 3. The most suitable mounting location for the electromagnetic lock may require the use of additional SECOLARM accessories such as Zbrackets, L ELECTROMAGNETIC LOCK Installation Manual SECOLARM U. S.

A.Inc. When power is applied to the electromagnetic lock, it turns on the unit's powerful builtin 3 WIRING INSTRUCTIONS fail safe strike with button and Keypad wired in series DC Power Supply Electromagnetic Lock or a Fail Safe Strike MAGNETIC LOCK INSTALLATION INSTRUCTIONS MAGNETIC LOCK WIRING INSTRUCTIONS MODELS WITH BOND SENSOR AND DOOR STATUS SENSOR 600LB, 600DLB, 1200LB, 1200D To remove the header plate, it may be necessary to remove the wiring compartment screw.

A long wiring The E600 Series magnetic lock is mounted to the underside of the header, on the stop side of the INSTALLATION INSTRUCTIONS E600 SERIES MAGNETIC LOCK Outswing Electrical Instructions: \INSTALLATION INST\Electromagnetic REV A3 0518 Page 2 1. Inspect the frame header to determine if mounting accessories are INSTALLATION MANUAL for ELECTROMAGNETIC LOCK Model: ECA 685KG (Waterproof) 1) Mechanical& Electrical Specification: INPUT VOLTAGE Make sure if your supply voltage is 12V or 24V Dc and connect the wiring accordingly.

Wrong connection or voltage will cause overheating and burn the electromagnets coil. will allow adjusting the View and Download DynaLock 2280 installation manual online. SINGLEOUTSWING ELECTROMAGNETIC LOCK. 2280 Door locks pdf manual download. Also for: 2282. All other wiring is for selected options. Refer to the separate. wiring instructions included for further information.

Ensure the electromagnetic lock is set for the correct voltage. Check for proper voltage at the electromagnetic locks input. If low, determine if the correct wire gauge is being used to prevent excessive voltage drop.

Remove any diode installed across the magnet for" spike" Lock body Read the manual before usage and keep for future reference. Electromagnetic Lock User Manual 1. Door Types: Wooden door, Glass door, Metal door, Fireproof door.

3Wiring of DoorState Detector The overload current of relay contact is 1amp. when the input is 24V



Phone: (376) 931-8117 x 5962

Email: [email protected]